Parts for QJMotor SFA 1000

The SFA 1000 EFI EPS is the top model in the QJMOTOR quad range. It is a very well-equipped model with a powerful V2 engine with up to 92.5 horsepower.

Proven technologies, applied by QJMOTOR engineers - this is what awaits you in the SFA 1000 model. QJMOTOR SFA 1000 was created to reach any hard-to-reach place in the terrain. It will be helped by independent suspension, tires with aggressive tread, increased ground clearance and, of course, an unmatched two-cylinder engine. When designing this model, QJMOTOR engineers were inspired by the best solutions used by well-known brands. Modern and technologically advanced, the SFA 1000 is the most competitive offering in the 1000cc quad segment.

Powertrain
This model uses a CVT transmission from the well-known American manufacturer CV TECH used by most well-known brands offering ATVs.
The all-wheel-drive system allows the rider to choose between two modes: 2WD and 4WD which have two more options each:

2WD with differential lock
In this case, torque is transferred exclusively to the rear axle. This mode works well on hard, pavement.

2WD with differential lock off
In 2WD mode on the rear axle, the rear differential lock can be disengaged This mode allows safe driving
at high speeds on hard ground and turning in a small radius without tearing up the surface, e.g. on a lawn

4WD with the front differential lock disabled
When driving on heavier terrain and steep climbs, it is a good idea to also include the front axle, i.e. 4WD mode

4WD with differential lock engaged
4WD mode with mech. lock. Differential lock will allow you to get out of the muddiest terrain. In this mode, however, you can virtually only drive straight ahead.

SUSPENSION SYSTEM
The SFA1000 is a powerful quad that requires a strong frame and strong suspension. The frame on this model is made of 32mm diameter steel tubing at the bottom and 25mm at the front. The upper part of the frame is a 100mm x 40mm steel section.

The front suspension is double wishbones on both sides. At the rear are two powerful forged trailing arms. All control arm pins have external lubrication. The front and rear suspensions have stabilizer bars.

The Yuan gas shocks on the SFA1000 have adjustable damping and threaded spring tension adjustment.

Cooling and ventilation
The SFA1000 EFI EPS is equipped with a liquid cooling system. The Japanese Panasonic fan and efficient pump will not let you “boil” even at +40°C.

In the SFA 1000, the inlet for ventilation of the gearbox and the inlet for the air filter have been elevated all the way to the display housing itself, i.e. to the highest possible place. This causes the possibility of sucking in water or dust to be reduced to a minimum.

WHEELS
The 14-inch aluminum wheels are the most versatile. They are suitable for off-road and on-road riding and have a large selection of tires on the market. On such wheels, the ATV handles better due to its lower profile.

The SFA 1000 has factory-installed rims with a beadlock system (rings that press the tire against the edge of the rim), so you can ride in heavy terrain with low tire pressure without the risk of the tire falling off the rim.

ELECTRONICS
A smart TFT display provides full information on the status of all systems of this vehicle, and will also allow the connection of mobile devices via Bluetooth. On the display, we can use navigation from a cell phone, monitor tire pressure and temperature in the CVT transmission.

Electric power steering (EPS) with three modes allows us to maneuver freely between trees at low speeds without extra effort.

The BOSCH brand EFI injection system ensures low fuel consumption, quick throttle response and easy starting in any temperature.

Comfort
With a wheelbase of 1,480 mm, this allows the driver and passenger to travel comfortably, along with substantial luggage. The passenger seat has a backrest with handles. The luggage racks allow the installation of trunks with a quick-release system.

The high ground clearance combined with independent suspension and optimized overall length provides excellent off-road capability and maneuverability.

Accessories
A 1500 kg capacity winch is included to provide excellent capability on impassable roads.

Warranty and service
One of the main advantages of the SFA 1000 is its two-year warranty with relatively long service intervals. In order to maintain the warranty and the proper condition of the SFA 1000, maintenance should be performed every 100 engine hours or 1600km.

All QJMOTOR quads are internationally ISO-9001 certified, which means two-level quality control of parts and equipment assembly.