SKU SIK036-MX
Brand Moretti Parts
282,94 €
net 237,77 €, 19% VAT

Complete engine 80cc, cover 430mm, for wheel 12", long shaft, EGR 139QMB/QMA (GY6 50) 4T

## Complete 80cc Engine, 430mm Cover, for 12" Wheel, Long Shaft, EGR 139QMB/QMA (GY6 50) 4T This complete 80cc engine from Moretti Parts is the ideal solution for scooters with 12" wheels and two rear shock absorbers. The long output shaft ensures smooth and precise installation. The engine is characterized by high quality workmanship, typical of the Moretti Parts brand, which guarantees reliability and long life. ### Performance and Economy The 80cc capacity provides dynamic riding while maintaining low fuel consumption of around 2l/100km. The horizontal engine orientation contributes to smooth operation and optimal fuel utilization. The absence of the EGR system further increases engine power, resulting in better performance. ### Key Parameters * **Capacity:** 80cc * **Belt cover length:** 430mm * **Wheel:** 12" * **Output shaft:** Long * **Number of shock absorbers:** 2 * **Engine code:** 139QMB/QMA (GY6 50) * **Number of strokes:** 4T * **Starter type:** Electric and kick * **Transmission:** CVT * **Cooling:** Air-cooled * **Oil filter:** Strainer * **Spark plug:** CR7HSA ### Set Includes Complete engine, manifold, carburetor, kick start lever. ### Additional Information The engine is not filled with oil - it must be purchased separately. Before purchasing, make sure that the belt cover length in your current engine is 430mm. ### Moretti Parts Brand Moretti Parts is a brand known for high-quality scooter parts. By choosing this engine, you are investing in reliability and safety on the road.
General parameters
Recommended wheel diameter ["]
Silnik należy montować w pojazdach o średnicy kół 12".
Number of strokes:
An internal combustion engine in which the duty cycle involves two revolutions of the crankshaft, which is equivalent to four reciprocating piston movements in one duty cycle.
Engine filled with oil:
For logistical reasons, the engine is not filled with oil, you will need to buy engine oil separately.
Capacity [cm³]
Pojemność silnika 80cm³
Gearbox type:
A CVT (continuously variable transmission) is theoretically the best-performing type of transmission with an unspecified number of ratios that change smoothly without jerking. It perfectly adjusts the gear range to the load of the engine at any given moment.
Motor orientation:
The engine is in the horizontal position which means that the piston works horizontally and not in the up-down direction. Engines in this configuration are reliable and have low fuel consumption.
Output shaft length:
Long output shaft means that the engine is suitable for scooters with two rear shock absorbers.
Components included
Zestaw zawiera: complete engine, spigot, carburetor, foot start leverc
Engine code (designation)
Kod wzoru silnika: 139QMB. Kod parametrów silnika, przykładowo 139FMB: 1 cylinder, tłok 39 mm , F - chłodzony powietrzem, M - motocyklowy, B - 50 cm
Belt cover length [mm]
Długość pokrywy paska to 430mm, przed zakupem upewnij się co do długości pokrywy paska w silniku, który wymieniasz, muszą być takie same.
Oil filter
Zastosowany filtr oleju: mesh
Startup type:
The engine is equipped with a electric starter and a foot starter.
Fuel consumption [l/100km]
Przybliżone spalanie na poziomie 2l/100km
EGR Exhaust Gas Circulation:
This product does not have an EGR exhaust gas recirculation system, which reduces exhaust emissions. The absence or removal of EGR has a positive effect on engine power.
Cooling type:
Cooling by natural air circulation or forced cooling by the built-in motor fan in plastic casings wrapping the cylinder.
Dedicated spark plug
Model dedykowanej świecy dla tego silnika to CR7HSA
Mounting for number of shock absorbers:
The motor can be installed in a scooter with two rear shocks. Please check before ordering.

product.no_reviews

product.review_prompt

Complete engine 80cc, cover 430mm, for wheel 12", long shaft, EGR 139QMB/QMA (GY6 50) 4T fits:

Jonway

Barton

Kymco

XS