Universal chain crimper, chain riveting tool, 420, 428, 520, 525, 50(530), WM Motor
4.00 on 4 reviews
3,18 €
4.00 on 4 reviews
During the use of a motorcycle, the drive chain wears out over time, and at some point the need for replacement arises, when buying a new drive chain, you can opt for a chain in a set with a master link or a rivet. Rivetted chains require a special tool and to make the replacement, you will need chain breaking and riveting equipment. Rivets connect the links of the drive chain from which it is formed. The chain can be replaced by breaking the old chain and rivetting the new one.
The riveting tool is the main tool for joining chain links. It ensures reliable installation of riveted links, minimizes the risk of tearing. The complete set of the device includes an anvil and mounting brackets. It performs riveting of drive chains and timing chains, examples of drive chain sizes are 420, 428, 520, 525, 50(530).
Advantages of using the riveting tool:
Periodic maintenance of the tool will ensure its long life and stable operation.
Chain breakers. Chain link removal tool.
Chain breakers are tools designed to disconnect chains by removing the connecting link. The usual way to remove a chain is to pull the pin out of the plate. A special chain breaker is a quick and easy way to remove a drive chain. The chain breaker is designed for heavy-duty use. You can quickly and safely remove the chain.
The chain breaker consists of a clamping mechanism that secures the link while removing the pin with a special rod.
Instructions for using the chain breaker:
If your chain is riveted, and not linked by a master link, you will need a tool to break it, and in the next step, to rivet a new chain.
To rivet the chain, use the following steps:
The easiest way to break a drive chain or timing chain is to use a special tool for this purpose. Breaking a chain without the right tool can be risky for you and your motorcycle.
If you have purchased a chain and it turned out to be too long, you can shorten it to the appropriate length yourself, without any problems, for this purpose use a suitable chain breaking tool or simply grind a rivet from a pre-measured chain link with an angle grinder, after this operation, depending on whether your new chain comes with a rivet or a master link you will be able to pin it by hand or rivet it with a suitable tool.